Need help: can I do this??

 

Anonymous
 
as you can see I am a newb and my bro bought me 2 10 inch 350 watts a piece pioneer subs. and was wondering can you buy a 1000w for a 700w subs??? and I dont have a Deck or an amp or any wires does anyone know where to get all the connections for cheap??
 

Bronze Member
Username: Davids2004

Houston, TX USA

Post Number: 89
Registered: Jun-04
Well what you need to do is look at the rms wattage on the sub and amp and match those up. If your going sealed you can get more power to each sub to keep you gains down. If your going ported keep them as close as possible. Also with a ported box make sure you have a subsonic filter on the amp to keep out low notes. To get your amp kit you will proably need a 4 gauge kit so check out http://www.knukoncept.com and get their 4 gauge kit. Also since you have a stock deck you will need a hi/low converter. Basically this will allow you to run rcas instead of the high end connectins and you can get that piece at any audio store. I believe they are called LOCs. I believe I answered all your questions.
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us