|
New member Username: Angelofdeath132Iowa Usa Post Number: 10 Registered: May-04 | looking at a pair of rockford 12" 2ohm dvc's rms 100-400w. with peak at 800w. the amp is a rockford p6001, 600rms x1 @ 2 ohms. now, if i'm understanding this right, each sub would be getting 300w. rms with this amp. right? if this is not a suitable amp, any suggestions on which rockford amp would work? thanks again |
|
Bronze Member Username: Angelofdeath132Iowa Usa Post Number: 11 Registered: May-04 | also looking at the rockford 1001bd amp 750w. rms x 1 @2ohms or 1000w. rms x1@1ohm but wasn't sure if that would be too much for those subs.......any input? |
|
Bronze Member Username: Angelofdeath132Iowa Usa Post Number: 12 Registered: May-04 | anyone? |
|
Joey Unregistered guest | I would get the 600x1 and wire the subs series parallel and you will have a 2ohm load and 300 watts to each. |
|
Anonymous | if thats not enough then just bridge them untill you get something better |