CAMTEK D1 monoblock

 

New member
Username: Xtc_crazy

Post Number: 1
Registered: Oct-07
Hi guys
I have a 3200W Camtek digital 750W RMS monoblock 1ohm stable and a XTC XTN 12" sub woofer 3000 DVC 4ohm I've connected the sub in parallel and bridged the amp, but still i can't get 1ohm out of the amp, do i really have to put in another sub as the enclosure built to spec is almost 2 cubic foot. any advice is welcome
 

New member
Username: Xtc_crazy

Post Number: 2
Registered: Oct-07
does any1 have any answers for me}}
 

Platinum Member
Username: Rovin

4 10 Pioneer...

Post Number: 12317
Registered: Jul-05
if ur sub is dual 4ohms then it can ONLY be wired to 2ohms or 8ohms

http://www.the12volt.com/caraudio/woofer_configurations.asp

......
 

Silver Member
Username: Cblaze

Tn Us

Post Number: 155
Registered: Sep-07
add another dual 4 ohm subn and u can drop it to 1 ohm
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us