Silver Member Username: PanamanianPanama cityPanama Post Number: 211 Registered: Aug-05 | It's a GTO1204BP-D JBL, is it good? to be powered by a: XM-2200GTX AMP SPECS are: 400W x 2 (max @ 4 Ohms) 600W x 2 (max @ 2 Ohms) 1200W x 1 (max @ 4 Ohms) 200W RMS x 2 @ 4 Ohms 250W RMS x 2 @ 2 Ohms 500W RMS x 1 @ 4 Ohms THD: 0.01% @ 1kHz Bass Filter variable, 50 - 300Hz @ 12 dB/Oct. Relation S/N: 100dB SUBWOOFER SPECS are: Power Handling, RMS 600 Watts Power Handling, Peak 1800 Watts Sensitivity (2.83V @ 1m) 96dB Frequency Response 30Hz - 150Hz Impedance 2 x 4 ohms Take a look at this: http://www.panafoto.com/detail.php?prod=3770 will it work? |
Platinum Member Username: James1115Use a simple... Post Number: 10332 Registered: Dec-04 | it will give 200/sub which is well underpowered. |
Gold Member Username: Van_manBoston South, MA Post Number: 2740 Registered: Mar-06 | "200W RMS x 2 @ 4 Ohms" You could wire each channel to each coil for 200 per coil, or 400 total for sub. Just make sure if there are settings for each channel, they are identical. |
Platinum Member Username: James1115Use a simple... Post Number: 10340 Registered: Dec-04 | I thought they were single 4 ohm subs, I guess not. |
Gold Member Username: JuliobSanto DomingoDominican Re... Post Number: 4862 Registered: Dec-05 | is one sub james. The amp will work, you must set the gain properly |
Silver Member Username: PanamanianPanama cityPanama Post Number: 212 Registered: Aug-05 | Will it still sound louder? 300rms x 2 = 600w rms for the sub, but the amp will send only 200w rms x 2 (400w rms) missing 200w Should I go with this one? (FOR 99.00 in PANAMA), and use the same amp I already have Bridged into 500w rms? Will this one play MUCH LOUDER than the other (using this configuration)? HEre's the link http://caraudiosecurity.com/shop/product/products_id/4028.html |