Need amp help

 

Silver Member
Username: Garciag

Post Number: 192
Registered: Jul-06
well when i first turn on my system the amp goes into protect mode and then it goes back to the green light which i guess means its ok but im not getting any output...ive checked the subs on another amp and they are working so what should i do, the gain was turned down and it was just refurbished by kicker about 3 weeks ago
 

Bronze Member
Username: Wylie_coyote

Post Number: 87
Registered: Apr-07
i would say check all ur connections, start with the RCA lead maybe even try replacing it and see what happens, this is a problem that a few people have. i would also say rather than taking the old RCA out of hiding just run a new one direct from the back of the HU to the amp and see if it works
 

Silver Member
Username: Garciag

Post Number: 194
Registered: Jul-06
i guess its not the RCAs i just did what you said and same result and all the connections look good so should i call kicker and see what they can do
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us