What frequeny should i be on?

 

Silver Member
Username: Mash4kash

Lafayette, LA

Post Number: 270
Registered: Feb-06
I got the older 1000bd on 2 s15L7 in a ported box tuned @ 32 Hz. On the amp I have the LPF at 50Hz from 50-250Hz scale is that right? Phase switch on 0, gain at 3/4. Theres no adjustable subsonic u eithe turn subsonic on or off. I never saw that b4. I assume the bass boost isf off because I don't have the remote bass control. Is my amp settings right?
 

Silver Member
Username: Mash4kash

Lafayette, LA

Post Number: 271
Registered: Feb-06
bump
 

Silver Member
Username: Mash4kash

Lafayette, LA

Post Number: 272
Registered: Feb-06
bumpbump gotdamn it
 

Gold Member
Username: Juliob

Santo DomingoDominican Re...

Post Number: 4445
Registered: Dec-05
gain at 3/4 hm... is you HU around 4V preout?????

If not then turn that thing down.
 

Gold Member
Username: N2audio

Lawrence, Ks USA

Post Number: 1265
Registered: Mar-04
You should be able to have your LPF somewhere around 80. If it's at 50 you're missing a lot of upper-low bass.
3/4 seems like a lot of gain.
 

Gold Member
Username: N2audio

Lawrence, Ks USA

Post Number: 1266
Registered: Mar-04
probably a good idea to turn on the subsonic too.
 

Silver Member
Username: Dakangofkrunk16

PLANET EARTH, FLA

Post Number: 748
Registered: Mar-07
http://www.subwoofertools.com/forum/setgain.asp
 

Silver Member
Username: Mash4kash

Lafayette, LA

Post Number: 273
Registered: Feb-06
my HU is 6.5V preout, subsonic is on will put LPF to 80 Hz sould I go any higher than 80 Hz?
 

Gold Member
Username: Nd4spd18

Southeast PA

Post Number: 1925
Registered: Jul-06
Set it where it sounds good to you, most people use 80-100 hz. Turn subsonic filter on, and set gain properly. Use that link ^^^^
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us