Problem here :-(

 

Bronze Member
Username: Theivan

Dawson Creek, British Colu... Canada

Post Number: 25
Registered: Mar-07
k well i replaced the fuse my amp just blew (JL 500/1) and it was a 60 amp fuse same fuse same ratinga as my old one. but now my subs only stay at one volume and plus when theyre at low volume it sounds like static. any ideas on how to fix this or did i somehow f*uck my amp? :'(
 

Platinum Member
Username: Glasswolf

Wisteria, Lane USA

Post Number: 11730
Registered: Dec-03
could be a wiring problem (bad ground, loose cable etc)
otherwise, make sure the amplifier gains are set properly an not cranked all the way up

if both of these check OK, your amp is damaged.
 

Bronze Member
Username: Bradddgeezy

Fort Wayne, IN USA

Post Number: 12
Registered: Mar-07
yeah i had a problem like that on my first amp. and it turned out that 2 of the channels were fried... good luck
 

Bronze Member
Username: Theivan

Dawson Creek, British Colu... Canada

Post Number: 29
Registered: Mar-07
k ill check the wiring and maybe use the other channel. if this doesnt work ill try using my old amp. hope i didnt fry my subs when this happened. ill post back later tonight or tomorrow to tell if i got it fixed. it might be a couple days ill have some pros take a look.....
 

Bronze Member
Username: Theivan

Dawson Creek, British Colu... Canada

Post Number: 30
Registered: Mar-07
yeah no luck, checked all my wiring the place i bought it from will have a look for me and might replace it for free. :-)
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us