Bronze Member Username: Nitrofour
Post Number: 23
Registered: Jan-07
|
Posted on does this setup work: Kicker ZX1000.1 ZX with IDMAX-12D2
the idmax's are 12d2... can that ohmage work with the zx? i knwo nothing about this stuff |
Gold Member Username: Nyyfan13
Fi SSD
USA
Post Number: 3012
Registered: Jul-06
|
Posted on the idmax is dual 2 ohm right?
if so then no, the zx kicker amps are 2 ohm stable and a dual 2 ohm sub can be wired to only 1 ohm or 4 ohm... |
Gold Member Username: Ctmike
Ct.
Post Number: 3095
Registered: Feb-06
|
Posted on no. the zx line is 2ohm stable so you'd have to get a dual 4ohm sub to work with it. |
Gold Member Username: Ctmike
Ct.
Post Number: 3096
Registered: Feb-06
|
Posted on damn, beat me to it |
Gold Member Username: Nyyfan13
Fi SSD
USA
Post Number: 3014
Registered: Jul-06
|
Posted on gotcha mike...lol |
Bronze Member Username: Nitrofour
Post Number: 26
Registered: Jan-07
|
Posted on okay so what's an amp that's $200-$330 that's high quality and would be good for them? i think the ideal rms for them is 750? |
Bronze Member Username: Nitrofour
Post Number: 28
Registered: Jan-07
|
Posted on any idea? |
Silver Member Username: Miles_hood
Tyler,
Texas
US
Post Number: 106
Registered: Jul-06
|
Posted on so can i wire a a zx1500.1 to my 2 l5's dual 2 ohm? |
Gold Member Username: Ctmike
Ct.
Post Number: 3118
Registered: Feb-06
|
Posted on start your own thread^^^^ |
Bronze Member Username: Denim
Www.TeamSSAudio.com,
MD
Post Number: 73
Registered: Nov-06
|
Posted on Ok some bad answers here,
yes the sub can be wired to 4 ohms mono, but you will not be getting the most of that amp, since it is optimized for 2 ohms mono. |
Silver Member Username: Rob932
Post Number: 109
Registered: Feb-05
|
Posted on Julian you said idmax's and them so do you have 2 subs or 1 b/c if you do have 2 that amp would work |
Gold Member Username: Juliob
Santo DomingoDominican Re...
Post Number: 4042
Registered: Dec-05
|
Posted on kicker kx 1200.1 or memphis (any 1000w rms model at 1 ohm) |