CONFUSED

 

moooooooo
if i got subs with dvc and a 4 channel amp that puts out 300 per channel could i hook up 2 channels to one sub for 600
 

Mike Bray
What ohm are the voice coils on the sub? What is the lowest ohm load the amp is stable at? But, you cannot run a DVC sub off both sides of the amp. You can run channel 1/2 to one sub and channel 3/4 to the other sub. Hope that helped
 

moooooooo
120 oz. Double Stacked Strontium Magnets
Power Handling: 700 watts R.M.S.
Frequency Response: 20Hz - 500Hz
Efficiency: 92.7 dB
PHAT 2" Foam Surround
Non- Pressed, Non-Transfer Paper Cone
KM3' Coated for Virtually No Cone Distortion
2.5" 4-Layer ASV Voice Coil
Dual 4 Ohm
2 Ohm or 8 Ohm Operation
Mounting Dimensions: Depth; 5 5/8" Hole; 11 1/8" Diameter; 12 3/4"
Multi-connect Lug Lock Terminals

thats what i got now it says dual 4 ohm so if i were to get a 4 channle amp that runs say 300x4 at 4 ohms would i be able to put channle 1 & 2 to one sub for a total of 600 and 3 & 4 to the other for the same?
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us