FLI AMP AND 12" SUB WIRING PROBLEM

carl holiday New member Username: Xemoxcorex Post Number: 1 Registered: Dec-06	Posted on Thursday, December 28, 2006 - 17:01 GMT I connected everything up first time fine and it was all working. i then re-wired everything to fit my car. the sub/amp im using is a "Fli Trap" 12" 1000w sub with a monoamp "Loaded 250". after the re-wiring it didnt work. the protection LED is constantly on. ive checked all fuses and wiring kit. what else could be wrong? cheers, Carl
carl holiday New member Username: Xemoxcorex Post Number: 2 Registered: Dec-06	Posted on Thursday, December 28, 2006 - 17:13 GMT Sub And Amp Specs: SUB: Sub Size - 12" RMS Power - 300w Peak Power - 1000w Sensitivity - 90db Frequency Response - 20 - 15000hz Impedance - 4ohms AMP: FLI Loaded 250 Monoamp
»»» DrUnkBoB ««« Silver Member Username: Teddy21 Ann Arbor, MI USA Post Number: 317 Registered: Feb-06	Posted on Thursday, December 28, 2006 - 17:17 GMT make sure your ground is very good, and it would probably help to just unhook everything and rewire the whole car...I mean since it worked just before, it should work fine now... that way you know that you covered every possible problem
carl holiday New member Username: Xemoxcorex Post Number: 3 Registered: Dec-06	Posted on Thursday, December 28, 2006 - 17:21 GMT i done that today but still nothing is working. i checked inside the sub box to see if the speaker wires had shorted but they're fine.

**FLI AMP AND 12" SUB WIRING PROBLEM**