AMP SETTINGS T3002

 

Silver Member
Username: Caraudio

Toronto, Ontario Canada

Post Number: 713
Registered: Sep-05
Cross over and Frequency on da Bass Boost knob.

Right now my FREQ on the amp is around 3/4 the way up.. my "poweR" on da amp is about a tad over 3/4 and on the bass boost knob the Cross Freq and Bass Boost are a tad under 1/4 the way up. Proper settings for deep bass. Oh man does the Kicker CVX in a ported enclosure POUND:|
 

Silver Member
Username: Caraudio

Toronto, Ontario Canada

Post Number: 714
Registered: Sep-05
Upload

Thats the back of the amp im guessing its to match the Freq on the amp and the Bass Boost but what does it do and whats a good setting for hard hitting rap?
 

Silver Member
Username: Caraudio

Toronto, Ontario Canada

Post Number: 715
Registered: Sep-05
my HU HPF is oFF and LPF is at 80 Bass is at +4/12 and Sub Level is at +2/12 (if it matters.)
 

Silver Member
Username: Caraudio

Toronto, Ontario Canada

Post Number: 716
Registered: Sep-05
ANYONE??
 

Gold Member
Username: Adddisorder

West palm, Florida

Post Number: 1481
Registered: Jan-06
you confused me?

are you asking for the settings it shoudl be at.

set the LPF to 80-90hz
gain best bet is to use a DMM and set it to your HU pre out voltage.
bass boost should be off or very little
 

Silver Member
Username: Caraudio

Toronto, Ontario Canada

Post Number: 717
Registered: Sep-05
NO im asking the Cross over requency at the back o the amp. (as in the picture) Therse also a cross freq on the bass boost knob.
 

Silver Member
Username: Naledge503

Portland, Oregon U.S.

Post Number: 420
Registered: Jun-06
like mat said. set it to LPF then set the crossover freguency to 80-90hz
 

Silver Member
Username: Caraudio

Toronto, Ontario Canada

Post Number: 718
Registered: Sep-05
Okay a higher cross over Freq at the amp and LPF of 80 on the HU what would that have happening
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us