Cap

 

Bronze Member
Username: Kickerman

Post Number: 28
Registered: May-06
how would i wire two caps to 2 diffrent amps.
 

Silver Member
Username: Makmillion

MN United States

Post Number: 973
Registered: Apr-06
I wouldn't bother with the caps, but if you must you would wire the caps together (+ to + and - to -) then use one of the caps as a distribution block and hook both amps into it.
 

Bronze Member
Username: Kickerman

Post Number: 29
Registered: May-06
well i was told by someone on here that i could use my red top battery, and they recommended another battery but if i didnt get another battery then to just get some caps

https://www.ecoustics.com/electronics/forum/car-audio/274534.html
 

Silver Member
Username: Makmillion

MN United States

Post Number: 985
Registered: Apr-06
Tyler M? He has a post score of 4, I don't know him but I know that a cap isn't useful unless you have a high output alt.

If you want to try it, you can hook it as stated above.. it might make a small difference but most likely it will hurt more than it will help unless you have a high output alt.
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us