NEED NAMES

 

Silver Member
Username: Mike17362

Durham, Nc Usa

Post Number: 120
Registered: Sep-06
need the names of some strong 2000 watt mono amps that will push a btl 18?
 

Silver Member
Username: Drsmith

Montana USA

Post Number: 793
Registered: Nov-04
budget? try soundstream they are inexpensive and are decent budget amps, talk to ben at low-hz.com he sells them
 

Gold Member
Username: Logan__tille

Hamilton, Indiana United states

Post Number: 1316
Registered: Feb-06
whats your budget, whats the vc config of the sub?
 

Gold Member
Username: Bestmankind

Los Angeles, CA USA

Post Number: 5986
Registered: Oct-05
you might want to go with something bigger than 2000wrms. if you got the dual 1 ohm version, you can use kicker kx2500.1. if you got the dual 2ohm version, you can use the orion 2500.
 

Gold Member
Username: Bestmankind

Los Angeles, CA USA

Post Number: 5989
Registered: Oct-05
with 2500wrms on your BTL 18, you would be driving down the street with some insane ((((((((BOOM))))))))
 

Silver Member
Username: Freezeman_7

Post Number: 267
Registered: May-06
FUSION
FCA-4000D

1 Channel D-Class Amplifier
4000 Watts
CEA 2006 Rated

Serious car audio competition requires high power and FUSION now delivers you the ability to create power to the extreme. The FCA-4000D utilises efficient non regulated power supply technology enabling high power outputs to your sub woofer system.
All FUSION D-Class amplifiers will accept 18 volts and are 1 ohm stable.
Dimensions (mm) (W) 290 (L) 1125 (H) 55, optional F-BASS Controller.

Product Specifications

Damping Factor >200
Variable Subsonic Filter 10Hz - 50Hz
Variable Input Adjestment 0 - 12 dB @ 45Hz
THD 0.05%
5-Way Protection Thermal, overload, DC-offset, short curcuit and reverse polarity

CEA 2006 OUTPUT POWER @ 14.4VDC
2007 Watts RMS per channel @ 4 Ohms and 1%THD+N
S/N > 65 dBA (reference 1 watt into 4 Ohms)

ADDITIONAL POWER RATINGS 12.6VDC
1780 Watts RMS per channel @ 4 Ohms and 1%THD+N
3100 Watts RMS per channel @ 2 Ohms and 1%THD+N
3890 Watts RMS per channel @ 1 Ohms and 1%THD+N

ADDITIONAL POWER RATINGS 14.4VDC
3160 Watts RMS per channel @ 2 Ohms and 1%THD+N
4120 Watts RMS per channel @ 1 Ohms and 1%THD+N
these are good amps man. this is a older model. thr newer models dont have one this big.
 

Silver Member
Username: Freezeman_7

Post Number: 268
Registered: May-06
FJL-1611D

1 Channel D-Class Linkable Amplifier
CEA 2006 Rated

1 Ohm / 2 Ohm Stable Linked
CEA 2006 Amplifier Power Standard Compliant
FUSION Regulated Amplifier Technology (F.R.A.T)
FUSION Intercooled Semi-conductor Technology (F.I.S.T)
FUTRANZ Efficient Heat Sink Transfer Technology
Gold Plated 4 gauge Power and Ground Connections
Gold Plated Audio Input and Output Connections
Gold Plated RCA Output for Multi-purpose installations
F-BASS Remote Controller Compatiable

Product Specifications

Bandwidth 10Hz C 50kHz
Signal to Noise >95dB
Fuse Rating 4 x 30A
Separation >60dB
Input Sensitivity 300mV-8V
LP Variable Crossover 40 Hz C 240Hz @ 24 dB / octave
HP Variable Crossover 40 Hz C 240Hz @ 24 dB / octave
Variable Bass Boost 0dB + - 18dB Gain @ 45 Hz
Variable Sub Sonic Filter 10 Hz C 55Hz @ 18dB / octave
Input Impedance 20K
Damping Factor >200
T.H.D 0.06%
Dimensions D 65.5mm L 468mm H 276mm

CEA 2006 Compliant Amplifier Ratings
12.6 Volt Power Output Specifications
600 WRMS per Channel @ 4 Ohms and U 1% THD+N
900 WRMS per Channel @ 2 Ohms and U 1% THD+N
1250 WRMS Bridged Channels @ 4 Ohms and U 1% THD+N

14.4 Volt Power Output Specifications
840 WRMS per Channel @ 4 Ohms and U 1% THD+N
1250 WRMS per Channel @ 2 Ohms and U 1% THD+N
1600 WRMS Bridged Channels @ 4 Ohms and U 1% THD+N

Linked Power Ratings @ 14.4VDC
2850 Watts RMS Linked @ 4 Ohms
3400 Watts RMS Linked @ 2 Ohms
or there is this. the step down. you used to be able to get these off ebay...
 

Gold Member
Username: Juliob

Santo DomingoDominican Re...

Post Number: 2645
Registered: Dec-05
seriously to keep this more reasonable, get rockford t2001bd


and yeah the soundstream is a good play, their pca 3500d is good also, you control the gain properly and you will power that sub properly and more...
 

Silver Member
Username: Mike17362

Durham, Nc Usa

Post Number: 140
Registered: Sep-06
DCA2500 how would this amp do with the btl and would it also work for a dd9515 cause im stuck between these two subs cause one min i hear that the dd9515 will be louder and the next i hear the btl18 will be louder so im out of it forreal on which sub to go with
 

Gold Member
Username: Drsmith

Montana USA

Post Number: 1050
Registered: Nov-04
whats your budget again
 

Silver Member
Username: Mike17362

Durham, Nc Usa

Post Number: 142
Registered: Sep-06
my budget is any thing between 4 and 5
 

Silver Member
Username: Mike17362

Durham, Nc Usa

Post Number: 143
Registered: Sep-06
how much is the FCA-4000D,FJL-1611D,DCA2500
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us