Kac-9152d help!!

 

New member
Username: Svtmassa

Post Number: 1
Registered: Sep-06
Hey , i had a kenwood kac 9152 d pushing two kicker solobaric 12L5 and they hit hard. Now I have the same amp pushing one jl 10w6v2 and it sounds underpowered??? Whats the deal?
 

Bronze Member
Username: 420alldaylong

Post Number: 13
Registered: Sep-06
It should be the other way around the JL should be fine the kickers should sound underpowered. But any ways make sure the ohm load are right.
 

Gold Member
Username: Juliob

Santo DomingoDominican Re...

Post Number: 2219
Registered: Dec-05
^^^^ yeah.. that might be the issue. Also what kind of box did you have with the kickers and now with the jls
 

New member
Username: Svtmassa

Post Number: 4
Registered: Sep-06
I had the kickers in a sealed box in a lightning, and now i have the jl in a ported box ina crewcab f150
 

Silver Member
Username: Van_man

Boston South, MA

Post Number: 901
Registered: Mar-06
The 2 kickers were probly wire to a 2 ohm load at about 450wrms each. The 1 JL was probly wired for a 4 ohm load at @ 350wrms
Post the amps specs. Im too lazy to research it.
 

Gold Member
Username: Juliob

Santo DomingoDominican Re...

Post Number: 2245
Registered: Dec-05
Emanuel... l5 and l7s need to go ported all the way bro! ^^^^^ marc is right
 

Gold Member
Username: Tjmutlow

Post Number: 2785
Registered: Sep-05
cant wire 1 w6 to a 4 ohm load, it is a dual 4 sub....
 

Silver Member
Username: Van_man

Boston South, MA

Post Number: 904
Registered: Mar-06
well then its probly wired for 8 ohm, Like I said too lazy to research it.
If ppl posted the specs of equip. it would make it easier for them to get help. That be like me posting, "my system stopped working, What could it be?"
 

Gold Member
Username: Juliob

Santo DomingoDominican Re...

Post Number: 2285
Registered: Dec-05
^^^^ lol.. i hate those threads
 

New member
Username: Svtmassa

Post Number: 8
Registered: Sep-06
900 watts rms at 2 ohms*** kenwood says..... dont know if its cea rated
 

Gold Member
Username: Tjmutlow

Post Number: 2799
Registered: Sep-05
way more then enough power for the 10w6
 

Gold Member
Username: Tjmutlow

Post Number: 2800
Registered: Sep-05
could it be in the wrong box? they only need a small box...
 

Bronze Member
Username: Svtmassa

Post Number: 11
Registered: Sep-06
i bought a box for a 10w7 ported would it make taht much difference? i measured it and it is only a couple inches wider, longer and deeper than the spec one for the 10w6
 

Gold Member
Username: Juliob

Santo DomingoDominican Re...

Post Number: 2297
Registered: Dec-05
boxes make a big difference... even 1 inch can change a whole sub
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us