|
Bronze Member Username: RianoPost Number: 53 Registered: Jan-06 | newbie question can u bridge 4 subs to a 2 channel amp? |
|
Gold Member Username: James1115Ct Post Number: 6412 Registered: Dec-04 | sure if the impedence is within the amps limit's |
|
Bronze Member Username: RianoPost Number: 54 Registered: Jan-06 | yea its 4 svc 4 ohm subs and a 2 channel amp that can only be bridged to 4 ohms |
|
Silver Member Username: Killer44Ontario Canada Post Number: 635 Registered: Dec-04 | http://www.crutchfieldadvisor.com/learningcenter/car/subwoofers_wiring.html?subs =4&impedance=SVC4 wire em like option #2, it will work but depending on what amp you got the subs prob wont be getting too much power when divided between all 4 of them... |
|
Gold Member Username: James1115Ct Post Number: 6417 Registered: Dec-04 | http://www.rockfordfosgate.com/rftech/wiringwizard.asp?WoofQty=4+woofers&WoofImp =Single+Voice+Coil+-+4+ohms wire them option # 2 and your all good |
|
Bronze Member Username: RianoPost Number: 55 Registered: Jan-06 | well its gonna be 4 10 inch assassins and a profile ap2000 amp |
|
Silver Member Username: Killer44Ontario Canada Post Number: 636 Registered: Dec-04 | whats the rms on the assasins, and what does the amp put out @ 4ohms brigded? |
|
Silver Member Username: Killer44Ontario Canada Post Number: 637 Registered: Dec-04 | so i searched it and ur amp is 960@4ohms bridged so its gunna be giving 240 to each sub, and on AA's site it sayd rec power 200 and rms 350, so not sure which one to go by but that amp should work fine for those subs... |
|
Gold Member Username: Dustin3Tigard, OR U.S. Post Number: 3216 Registered: Oct-05 | you always go by the rms rating. so you would be underpowering the subs, and profile is a lil overrated so you would be underpowering them a lil more even |
|
Bronze Member Username: RianoPost Number: 57 Registered: Jan-06 | new question i just got 2 dvc 4 ohm subs can u run the positive side of the speaker wire from both subs to the same positive terminal on the amp and same with the negative so i will only be using 2 terminals instead of all 4 and get the 960rms bridged instead of the 320 x2? |