|
Silver Member Username: CaraudioToronto, Ontario Canada Post Number: 643 Registered: Sep-05 | 1800 Watts Max 150 x 2 RMS @ 4 ohms 300 x 2 RMS @ 2 ohms 600 x 1 RMS @ 4 ohms 184 x 2 RMS average output 360 x 2 RMS average output 720 x 1 RMS average output 12 db If im to wier my sub to a 2OHM Load since its a DVC 4OHM will it work to give me the 720RMS ALso is ROckford Fosgate really good?? |
|
Gold Member Username: JuliobSanto DomingoDominican Re... Post Number: 1926 Registered: Dec-05 | bro what model is that and yeah rockford is good, also what sub do you have?? |
|
Silver Member Username: CaraudioToronto, Ontario Canada Post Number: 646 Registered: Sep-05 | What about this Rockford Fosgate PUNCH P8002 2400 Watts Max 200 x 2 RMS @ 4 ohms 400 x 2 RMS @ 2 ohms 800 x 1 RMS @ 4 ohms 260 x 2 RMS average output 489 x 2 RMS average output 978 x 1 RMS average output 1 Is this 978RMS at 2OHMS? How much can i get at 4OHMS X 2? |
|
Gold Member Username: JuliobSanto DomingoDominican Re... Post Number: 1929 Registered: Dec-05 | there's a link on RF homepage, like a sheet with their rated power/ actual rated power... for example i saw it once the T1000.... is 1000w rms/ the actual power is like 1600w.... |
|
Silver Member Username: CaraudioToronto, Ontario Canada Post Number: 648 Registered: Sep-05 | First one is :http://cgi.ebay.ca/ws/eBayISAPI.dll?ViewItem%26%26item%3D180017241662&ssPageName =STRK:MEWA:IT&ih=008 Rockford Fosgate PUNCH P6002 I have Kicker CVX. Im just wondering how true to their rating is Rockford Fosgate? Because 720RMS Refrub is 162 dollars ROCKFORD FOSGATE PUNCH P8002 2 CHANNEL 2400 WATT this one is 10 bucks more then the kicker Zx750. So i guess id look into either one. But their both Refurb so what does that mean? |
|
Gold Member Username: JuliobSanto DomingoDominican Re... Post Number: 1931 Registered: Dec-05 | a refurb is an amp that in the process failed, maybe the components or didn't put the rated power OR an amp that was returned because had a problem... so they Repair it leaving the old case (external parts) and put new components in (internal board, mosfets...) I would go with the kicker ZX |