Broken amp

 

New member
Username: Ruda

Deming, new mexico Us

Post Number: 1
Registered: Aug-06
hey guys i have a hifonice brutus 2006D amp that i matched with 2 power acoustik mofo 12 on a cut through. well when it was installed it worked for about 3 days and blew the breaker and stayed in protect mode. i had it checked out and said it worked. im system ignorant i mean i know what i like but i don't know how to install crap. well some other dealer installed it and worked for a few seconds before he started cranking it up as soon as he did it cut off. he said that the subs are wired at 1 ohm each and that the amp is 1 ohm also. he said that its trying to do a .5 ohm and that something is wrong with the amp.
im thinking something is burned inside.

can anyone help wit this problem has this happened to anyone??

i need help its too quiet in my truck!!!!
 

Gold Member
Username: Illuminator

USA

Post Number: 4099
Registered: Apr-05
You have your subs wired wrong.

They need to be wired in series...if the amp is running an ohm load of .5 which it can't handle, then obviously it's going to burn up.
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us