Which one of these amps would be best?????????

 

New member
Username: Jamo

Post Number: 7
Registered: Jun-06
If I have the 3 12" audiobahn AW1251SE that are 400 watts rms each are dual 4 Ohm and 2 or 8 Ohm operation which one of these amps would be best

1500 W AUDIOFONICS DIGITAL AMP ADF243






Description
1500 WATT AUDOFONICS DIGITAL AMPLIFIERS W@W!
AUDIOFONICS DIGITAL MAX
2-Ch 1500 WATT POWER AMPLIFIER
BRAND NEW IN FACTORY SEALED CARTON
AUDIOFONICS DIGITAL MAX
2-CHANNEL BRIDGEABLE POWER AMPLIFIER
MAXIMUM POWER OUTPUT 1500 WATTS
RMS POWER OUTPUT:
2 CHANNEL MODE AT 2 OHMS = 300W X 2
2 CHANNEL MODE AT 4 OHMS = 200W X 2
1 CHANNEL MONO MODE AT 4 OHMS 600W X 1
2 OHM LOAD CAPABILITY
VARIABLE LOW (30-500Hz) PASS FILTER
VARIABLE HIGH (50-1KHz) PASS FILTER
SUBSONIC FILTER 10Hz-100Hz
BASS BOOST
RCA PRE-AMP LINE OUT
SPEAKER LEVEL INPUT
BUILT IN SUPER QUITE COOLING FAN
Please note that we do not ship to outside USA .
Shipping amount will calculate at checkout based on the wieght of this item and your zip code. This will be shown to you before you fully submit your order.












Lanzar Heritage Series
Model #HTG434 - 4-Channel 1200 Watt Amp
4x150W RMS at 4 Ohms
4x300W Max at 4 Ohms
2x600W Max at 4 Ohms Bridged
4x250W RMS at 2 Ohms
Dimensions: 9-7/8" x 2-3/8" x 15-1/8"
Price: $159.95

Power Acoustik
Model #PA2-1200 - 2-Channel 1200 Watt Amp
MAX Bridged: 1200
RMS @ 4 Ohms: 250x2
RMS @ 2 Ohms: 300x2
RMS Mono: 600
Dimensions: 20.5" x 11.25" x 2.25"
Price: $179.95

SPL
Model #ST2-1440 - 2-Channel 1440 Watt Amp
MAX Bridged: 1440
RMS @ 4 Ohms: 300x2
RMS @ 2 Ohms: 360x2
RMS Mono: 720
Dimensions: 18.75" x 11 x 2.3"
(This Model Includes A Remote Bass Boost)
Price: $179.9

Ultra Linear
Model #UL2600D - 2-Channel 1200 Watt Amp
2x600W Max at 4 Ohms
1x1200W Max at 4 Ohms Bridged.
2x450W RMS at 2 Ohms
Dimensions: 9-3/4" x 2-1/4" x 11-3/4"
Price: $129.95
 

Gold Member
Username: Tjmutlow

Post Number: 2492
Registered: Sep-05
none of those amps will work for three subs , you need a mono amp, and really one that is stable at 2 ohms, the best impedence for those would be a 2.66 ohm load.... try Audiobahn A1600v or 1300hct.
 

New member
Username: Jamo

Post Number: 8
Registered: Jun-06
what are some other subs i can use?
 

New member
Username: Jamo

Post Number: 9
Registered: Jun-06
what are some other amps i can use
 

Gold Member
Username: Tjmutlow

Post Number: 2499
Registered: Sep-05
what kind of car, how many subs do you want to run, and most important, what is your budget for everything?
 

New member
Username: Jamo

Post Number: 10
Registered: Jun-06
It will be three subs in a ford focus and i already have the subs and the box all i need is the amp i wanted a amp under 200 if i could but if i have to go a little over then i probaly will but under would be better.
 

Gold Member
Username: Tjmutlow

Post Number: 2506
Registered: Sep-05
you can get the Audiobahn A16000v for about 250 on ebay, prob your best bet....
 

Bronze Member
Username: Jamo

Post Number: 12
Registered: Jun-06
Will this work Audiobahn A2150HCT 2 chnl 1200 wattRMS Amp
 

Gold Member
Username: Tjmutlow

Post Number: 2510
Registered: Sep-05
no that amp will only be pushing about 450w at that ohm load.
 

Bronze Member
Username: Jamo

Post Number: 13
Registered: Jun-06
450 to each sub or all together
 

Bronze Member
Username: Jamo

Post Number: 14
Registered: Jun-06
this work? Power Acoustik Gothic OV2-1600 2 Channel Amplifier
 

Bronze Member
Username: Jamo

Post Number: 15
Registered: Jun-06
Lanzar VIBE248 2 Channel D Amplifier
????????????????????
 

Gold Member
Username: Tjmutlow

Post Number: 2512
Registered: Sep-05
with those subs, you have to stay away from 2 channel amps
 

Bronze Member
Username: Jamo

Post Number: 16
Registered: Jun-06
i found a 1300hct that i am gonna try and get
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us