Kenwood 9102d trouble

 

New member
Username: Blkdel_sol

Post Number: 2
Registered: Jul-06
i have a kenwood 9102d amp and it isnt workin. i have put different amps in my car and they all work fine, so im thinkin its not my wires. what happens is when i have it all hooked up, it wont turn on. but when i mess with my ground cable, the amp will flicker on and off. for example, when i touch the ground wire to a good ground, the amp will flick on then off real quick. any ideas will be apperciated.
 

Gold Member
Username: Chaunb3400

Huntsville, Alabama U.S.

Post Number: 7947
Registered: Jul-05
check ur fuses in ur amp
 

New member
Username: Blkdel_sol

Post Number: 3
Registered: Jul-06
there are two fuses on the amp and i have checked them both and they seem to be fine. any other suggestions?
 

Gold Member
Username: Juliob

Santo DomingoDominican Re...

Post Number: 1030
Registered: Dec-05
see if your amp smells like smoke
 

New member
Username: Blkdel_sol

Post Number: 4
Registered: Jul-06
i checked and it doesnt smell like anything
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us