Need help with A8000T

 

Silver Member
Username: Reef

Post Number: 334
Registered: Oct-05
Ok i just got my amp and i need to ask a couple of Questions, ok how do i set the Input sensitivity level? wat should i set my subsonic variable to?and what does the Phase shift switch mean? if you could help that would be great!
 

Gold Member
Username: Fandim

Reno, Nevada United State...

Post Number: 1150
Registered: Jun-05
Subsonic, depends on your box type, and tuning. If you're using a sealed box, you dont need to worry about this feature at all.

Phase switch, is basically a timed-correction if you're using subs run off multiple amps or in seperate posistions. Your input sensitivity, should be set up to match the output voltage of your head unit.. (Or slightly higher, to it's at max volume at roughly 3/4's of your HU's volume to avoid distortion.)
 

Silver Member
Username: Reef

Post Number: 335
Registered: Oct-05
ok so my box is a ported box its gunna be 34hz so should i have the phase shift switch on?
 

Gold Member
Username: Dustin3

Tigard, Or U.S.

Post Number: 1543
Registered: Oct-05
if ur runnin more than one amp then yes. set ur subsonic filter to 34 hz
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us