Light In Box?
|
Silver Member Username: LexuscoopPheonix, Arizona USA Post Number: 648 Registered: May-06 | im building a box for my 10w6v2's and the box has mirrors in it, i want to have as little wires as possible, and have a white floresent lamp in it, can anyone help me figure out how to do this? |
|
Gold Member Username: TheelfkeeperStockbridge, GA USA Post Number: 2311 Registered: Feb-05 | drill your holes to run the wires as close to where you are gonna mount the lights as possible. keep all the wires short and tight. |
|
Silver Member Username: LexuscoopPheonix, Arizona USA Post Number: 660 Registered: May-06 | thanks, but its going to be problem drilling the holes, i have mirrors in my box on all sides... |
|
Silver Member Username: LexuscoopPheonix, Arizona USA Post Number: 667 Registered: May-06 | does anyone knwo how to drill a hole threw a mirror? |
|
Silver Member Username: Van_manBoston, MA Post Number: 522 Registered: Mar-06 | Carefully... Dremmel makes a glass bit. Also tile bits will work. To stop the bit from walking use a small awl and gently chip the glass where you are going to drill. Try it on some scrap glass first, if I was you. |
|
Silver Member Username: Van_manBoston, MA Post Number: 523 Registered: Mar-06 | http://au.dremel.com/html/products/toolsacc_fr.html |
|
Silver Member Username: LexuscoopPheonix, Arizona USA Post Number: 723 Registered: May-06 | nvm, i desided that it would be easyer to run the wire out right next to the woofer becase there wont be any glass there  lol |
|
Silver Member Username: LexuscoopPheonix, Arizona USA Post Number: 724 Registered: May-06 | thank you for your help though, its highly apreciated |
Main Forums
Today's Posts- Home Audio Forum
- Home Video Forum
- Home Theater Forum
- Car Audio Forum
- Accessories Forum
- All Forum Topics