Would these crossovers work?

 

New member
Username: Frshlkjuce

Post Number: 6
Registered: May-06
I have a set of focal polyglass component 6.5's that I am putting in the back of my honda civic (hole originally designed for 6x9's, and the 6x9's are no bueno). I dont have my focal crossovers anymore (when I had them uninstalled 2 years ago apparently they didnt make it out alive?). Would a set of oz vector or matrix crossovers work? I know oz makes quality stuff so I was wondering if any of those would be adequate. Your help is greatly appreciated, im debating installing all of this on my own (all the help in the world is needd!)
 

Bronze Member
Username: Bobimpact

Danbury, CT US

Post Number: 24
Registered: May-06
Try to get the Focal crossovers first, crossovers are set to work with the speaker that they came with (slopes, crossover points etc..) You've got a great set of components and theres no sense in hamstringing them by putting the wrong crossovers on them. OZ does make good stuff, but the speaker setups are different than Focals.
 

New member
Username: Frshlkjuce

Post Number: 7
Registered: May-06
anybody know of anywhere that i can come across some focal x-overs?
 

Silver Member
Username: Winn

Santa Ana, California US

Post Number: 136
Registered: Jun-05
Try Ebay ...
 

Silver Member
Username: Mixneffect

Orangevale, Ca. USA

Post Number: 972
Registered: Apr-05
http://www.focal.tm.fr/accueil_en.htm

Try Focal direct. They may be able to direct you to a dealer if they do not sell direct. I would even try DIY places too.

www.madisound.com
www.zalytron.com
www.solen.ca
www.partsexpress.com
www.oregondv.com

Ebay may still be your best bet though.
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us