|
New member Username: HockeyknightPost Number: 5 Registered: Apr-06 | i need 1 as cheap as possible. any1 got any sugjestions? |
|
Silver Member Username: GagePost Number: 158 Registered: Feb-06 | jl 1000/1 pg 1200.1 not to many amps do 1000rms at 4 ohms |
|
New member Username: HockeyknightPost Number: 7 Registered: Apr-06 | well how do i power a 4ohms sub with an rms of 1000?? IM SOOO CONFUSED lol thanks fer the reply! |
|
Silver Member Username: Matt12490Benicia, California USA Post Number: 665 Registered: May-05 | you can also look into 2 channel amps that put out 1000w when bridged into a 4ohm load. |
|
Bronze Member Username: Akula_classPost Number: 63 Registered: Feb-05 | What is the name of your sub? |
|
Bronze Member Username: HockeyknightPost Number: 17 Registered: Apr-06 | alpine type x |
|
Bronze Member Username: _jay_Post Number: 63 Registered: Mar-06 | make it into a 1ohm load... BXI2006D would be the ideal amplifier to use..well atleast that is what i use for my 2 type X's n' it works great even tho it could take more power..that amp works great. |
|
Bronze Member Username: _jay_Post Number: 64 Registered: Mar-06 | sorry for double post but if you only have 1 type X use the BXI1206D because then your putting out more then its rated for and the sub always wants more so you should be plenty happy with that amp. while running 1200 watts rms x 1ch @ 1 ohm |
|
Bronze Member Username: HockeyknightPost Number: 19 Registered: Apr-06 | how do i make the type x into a 1ohms load |
|
Gold Member Username: RzarectorCoquitlam, Bc Canada Post Number: 1033 Registered: Dec-04 | you cant you can wire it at a 2ohm load or 8 ohms which is out of the question.. for 2 ohms you wire it the voice coils in parrallel pos to pos neg to neg |
|
Silver Member Username: Dustin3Tigard, Or U.S. Post Number: 764 Registered: Oct-05 | wait. do you have 2 dvc 4 ohm subs, or 1 dvc 2 ohm sub?? |
|
Silver Member Username: Dustin3Tigard, Or U.S. Post Number: 765 Registered: Oct-05 | and adam... use www.the12volt.com to find out how to wire your subs together. go to woofer wiring and then select the impediences and how many subs u have. |
|
Gold Member Username: RzarectorCoquitlam, Bc Canada Post Number: 1041 Registered: Dec-04 | i think he has 1.. type x's only come in dua 4 ohm config |
|
Silver Member Username: Dustin3Tigard, Or U.S. Post Number: 771 Registered: Oct-05 | so basically adam, you dont want an amp 1000 @ 4 ohms, but 1000 @ 2 ohms since 1 dvc 4 ohm sub cant wire to a 4 ohm load. www.the12volt.com (adam) |
|
Silver Member Username: N2audioLawrence, Ks USA Post Number: 798 Registered: Mar-04 | the "as cheap as possible" part makes it tough. There are several budget amps that are 1000w at 1 ohm but for some reason they're much less common at 2 ohms. PG has one in the Octane line that would work - 15.0:1 This would do a good job - http://www.onlinecarstereo.com/CarAudio/ProductDetail.aspx?ProductID=14934 You might also check ebay for a JBL BP1200.1 |
|
Silver Member Username: N2audioLawrence, Ks USA Post Number: 799 Registered: Mar-04 | Here's a refurb excelon for $200 http://www.onlinecarstereo.com/CarAudio/ProductDetail.aspx?ProductID=15611 |