Mono amp question

 

Bronze Member
Username: Cocizzie

Bakersfield, Cali.

Post Number: 17
Registered: Mar-06
this is my first mono amp its a hifonics xx hercules 2000 watts rms @ 1ohm. my question is ,if i got two 4ohm subs and run them at 1ohm how much power would i get to each sub,1000 each or 2000? depending on the answer are there any sub suggestions in 12 inch dual 4ohm.i was thinking treo ssi,alpine swx,kicker cvx or L7,any opinon well be apreciated. thanks
 

Gold Member
Username: Southernrebel

Monroe, Louisiana USA

Post Number: 2608
Registered: Mar-04
yes...if you wire that amp to 1ohm it will split its power equally to each of your subs.

ex: 2 DVC 4ohm L7's...each will see 1000wrms.
 

Gold Member
Username: Tjmutlow

Post Number: 1824
Registered: Sep-05
that amp will not see 2000w unless it is getting the right voltage, the stock system will not provide that, the amp is going to cut off, not enough power to it....
 

Platinum Member
Username: Glasswolf

Wisteria, Lane USA

Post Number: 11458
Registered: Dec-03
if you have a mono amp, and two 4 ohm SVC subs, how do you plan to get a 1 ohm load?
 

Silver Member
Username: Juliob

Santo DomingoDominican Re...

Post Number: 309
Registered: Dec-05
two RE XXX, but as ty said, do an electrical upgrade
 

Bronze Member
Username: Cocizzie

Bakersfield, Cali.

Post Number: 19
Registered: Mar-06
no they're dvc
 

Silver Member
Username: Juliob

Santo DomingoDominican Re...

Post Number: 311
Registered: Dec-05
2 Dual 4 ohm subs wired parallel/parallel=1 ohm load corey
 

Bronze Member
Username: Nanbakat

Mexico CityMexico

Post Number: 23
Registered: Mar-06
Yea...just like this picture...

Upload
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us