|
Bronze Member Username: _jay_Post Number: 25 Registered: Mar-06 | well i am wondering with my 2 swx-1242D amps i only have 150-250$ to spend on an amp... i was told 2 get an orion 2500d..but thats only a mono amp..i was wondering if i bridged my 2 subs together..single they r 500-1,000rms@4ohms ea...if i bridge them to 1 amp into a 4 ohm load....could i get an amp that i can have mono n' run it into it at 2,000watts?? as a 4ohm load n' 1 channel..i totlay lost...noobie..sorry confused...help pls |
|
Gold Member Username: TjmutlowPost Number: 1745 Registered: Sep-05 | for the right amp you need to save and get the 2500d, you can find them on ebay for anywher from 275 and up. |
|
Bronze Member Username: _jay_Post Number: 26 Registered: Mar-06 | hmm more options?? and sum1 help me out w\ the 1 channel shizzit..since its 2 subs why would i get a 1 channel? |
|
Gold Member Username: TjmutlowPost Number: 1748 Registered: Sep-05 | because those are dual 4ohm subs and you either need a strong 2 channel and run stero or a mono 1ohm amp, and you prob are not going to find a good one for 250 |
|
Bronze Member Username: _jay_Post Number: 27 Registered: Mar-06 | LA2038 MXA282 one of those do it?? |
|
New member Username: Skidoo32Post Number: 1 Registered: Mar-06 | ok i have a 94 pontiac grand am and i was wondering how to hook up my system to the stock cd player? |
|
Bronze Member Username: _jay_Post Number: 28 Registered: Mar-06 | take it right from the speakers...just take a line right from their or take apart ur dash n' have sum fun.. |
|
Gold Member Username: TjmutlowPost Number: 1754 Registered: Sep-05 | I doubt very seriously that those amps will make those move... |
|
Gold Member Username: Chaunb3400Huntsville, Alabama U.S. Post Number: 6286 Registered: Jul-05 | where those subs givin to u, because no way ur gonna pay 500 for sum subs and cant even afford to power them Really look into Hifonics amps cheap power, kinda overrated (rms wise) but they will get the job done |
|
Silver Member Username: Dustin3Tigard, Or U.S. Post Number: 637 Registered: Oct-05 | usually jay, for 2 subs you get a mono amp, 1 sub = 2 channel, speakers = 4 channel. its kinda like backwards. |
|
Gold Member Username: Chaunb3400Huntsville, Alabama U.S. Post Number: 6288 Registered: Jul-05 | "1 sub=2 channel" WTF Read http://wickedcases.com/caraudio/amplifiers.html |
|
Silver Member Username: Dustin3Tigard, Or U.S. Post Number: 644 Registered: Oct-05 | i know. i have read that chaunc. most setups i see, even on this site people with 1 sub usually has a 2-channel amp. i am just saying what i have seen on this site. it doesnt really matter though, 2-channel or mono, you just plain out need an amp that puts out the power you need and can connect the the sub(s). also, chanc, dont take the iraq thing personal, its just a basic debate that i think is very good. just a debate, dont have anything against you. |
|
Bronze Member Username: _jay_Post Number: 29 Registered: Mar-06 | hmm...so would i be better off in price wise going on a mono amp and going at a 4ohm load, then getting a high quality compacitor lyke a 5 or 6 frag? JaY |
|
Gold Member Username: RovinTrinidad & T... Post Number: 6870 Registered: Jul-05 | Jay - u sound like an absolute Newb - i suggest that u THOROUGHLY read http://wickedcases.com/tutorials/index.html www.bcae1.com www.the12volt.com Then come back here ..... |
|
Gold Member Username: RedlinerWilmington, Ma Post Number: 1146 Registered: Jun-05 | jay its a capacitor and they are measured in farads and one will not help you i agree with rovin go read those please |
|
Bronze Member Username: _jay_Post Number: 30 Registered: Mar-06 | oook? so if i bridge the 2 subs, how many watts should it be lyke 2,000watts RMS x1@4ohm load -JaY |
|
Silver Member Username: Dustin3Tigard, Or U.S. Post Number: 650 Registered: Oct-05 | jay, you should really read the sites. everyone starts as a newb and everyone has basically read top to bottom of those site's. just read and if u still have qestions, come back and u dont need a cap. more strain on alt. not worth it |
|
Bronze Member Username: _jay_Post Number: 31 Registered: Mar-06 | ook i've read it but i'm still at what i was in the first place..lol o well...i'm just wondering if that set up would work bridging would it be 2,000watts?@4ohm |
|
Gold Member Username: Chaunb3400Huntsville, Alabama U.S. Post Number: 6317 Registered: Jul-05 | bassman3, i never looked at the thread after i posted the 1st time.lol, so no harm no foul.lol |
|
Bronze Member Username: _jay_Post Number: 32 Registered: Mar-06 | i was told to get 2...profile AP1040 |
|
New member Username: SandrewPost Number: 1 Registered: Mar-06 | i have a pioneer 1000w mono clas amp i am running two dual coil kenwood subs but it isnt very good please tell me why |
|
New member Username: SandrewPost Number: 2 Registered: Mar-06 | help me please |
|
Gold Member Username: Chaunb3400Huntsville, Alabama U.S. Post Number: 6331 Registered: Jul-05 | do u have everything hooked up right and if so it could be that ur stuff really isn't that good |
|
New member Username: SandrewPost Number: 4 Registered: Mar-06 | yeah its hooked up ight, the amps a good one but got the subs cheap $250 eavh at autobarn is a mono amp good 1000w?? |
|
New member Username: SandrewPost Number: 5 Registered: Mar-06 | the amp is the best autobarn sell it a car audio shop, a 1000w mono should pump ay? |
|
Gold Member Username: TjmutlowPost Number: 1768 Registered: Sep-05 | what is the ohm load on the amp, if it is the gm-d510 amp your either getting less then 600w@4ohms or the amp is down to a 1ohm load and your going to blow it up, and subs could be out of phase... |
|
New member Username: SandrewPost Number: 6 Registered: Mar-06 | what do u mean out of fase??? it is pioneer gm_d510m is it a goody??? how do i fix |
|
New member Username: SandrewPost Number: 7 Registered: Mar-06 | Pioneer GM-D510M 1000w MONO Class D Amplifier Peak Music Power: 1000 Watts Number of Channels: 1 Load Impedance Capability: 2 ~ 8 Ohm (Mono) Continuous Power: (4 ohm) 300W x 1 Continuous Power: (2 ohm) 600W x 1 Frequency Response: 20 ~ 240Hz Total Harmonic Distortion: 0.03% Signal-to-Noise Ratio: 100dB Dimensions: 10-3/16" x 2-1/16" x 9-13/16" thats the info on it |
|
New member Username: SandrewPost Number: 8 Registered: Mar-06 | do i need to get 2ohm sub????? can u get 2 ohm subs????? |
|
Gold Member Username: Young_jamesCanada Post Number: 1096 Registered: Sep-05 | what VC config are you subs now? |
|
Gold Member Username: TjmutlowPost Number: 1773 Registered: Sep-05 | get a beeter amp, pioneer is not know for there amps, get a 1ohm stable amp, like a directed or orion, kicker, etc.. |
|
Bronze Member Username: _jay_Post Number: 33 Registered: Mar-06 | mind not flamin my post with other peoples posts......keep 2 meh topic pls... |