Wiring Solo barics to Kicker amp.

 

New member
Username: Sweed

Post Number: 1
Registered: Feb-06
Yo, I need help. I have 2 12" L7 solo barics and the Kx850.2 amp. Can anyone inform me how to hook-up. right now I have it bridged with the subs going from pos. on coil one and neg. on coil two and wire connecing the other two post.Is this correct?
 

Bronze Member
Username: Eeater

Post Number: 24
Registered: Feb-06
Are your L7's 2 or 4 OHM ??
 

New member
Username: Sweed

Post Number: 2
Registered: Feb-06
They are 4 ohms
 

New member
Username: Sweed

Post Number: 3
Registered: Feb-06
They are 4 ohms.
 

Bronze Member
Username: Suphahighfly

Post Number: 20
Registered: Oct-05
http://www.crutchfieldadvisor.com/learningcenter/car/subwoofers_wiring.html?subs =2&impedance=DVC4x2

that will have all the information that you need. im not any good at wiring with words, im a hands on guy.
 

Gold Member
Username: Tjmutlow

Post Number: 1516
Registered: Sep-05
if they are dual 4 ohms, then run 1 speaker to each channel, wire + to + and - to - on each sub, then to the amp, running stereo mode.
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us