I need help wiring.

 

New member
Username: Roland_42

Cuero, Texas United States

Post Number: 1
Registered: Jan-06
I want to put 4 15" subs that have a rms of 1200watts each. i want to hook them up to 2 amps that are 2400watts each. how do i do the wiring to hook them up together?
 

Silver Member
Username: Brynm

Prince Albert, SK Canada

Post Number: 145
Registered: Jul-05
give us more specs on the amp and subs, or the model numbers. We need to know what voice coils your subs have and what ohhms that 2400watts is rated at and what the amp will support
 

New member
Username: Roland_42

Cuero, Texas United States

Post Number: 2
Registered: Jan-06
Now how would i hook all this up together. thanks alot for helping. I really thank you lots.
 

New member
Username: Roland_42

Cuero, Texas United States

Post Number: 3
Registered: Jan-06
http://www.allaudioexpo.com/nav/details.asp?itemid=2009&catid=68 This is the specs of the 2 2400 watt amplifiers for the 4 15" subs. this is the address for the 4 15's: http://www.allaudioexpo.com/nav/details.asp?itemid=1449&catid=176 And then i want to hook up a 800 watt amp to my highs. this is the site: http://www.allaudioexpo.com/nav/details.asp?itemid=2005&catid=68
 

Gold Member
Username: Tjmutlow

Post Number: 1027
Registered: Sep-05
you will have to run each sub to 8 ohms the parallel them (pair) back down to 4ohm in order to run them on each amp, that amp i9s only 4ohm stable. (assuming, because it is a pyrqamid and there is no real specs on it)
 

New member
Username: Roland_42

Cuero, Texas United States

Post Number: 4
Registered: Jan-06
as far as the wiring kit, how do i do that? how would i hook up the two amps to eachother/
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us