Old punch 30 problem

 

New member
Username: Pike110

Post Number: 7
Registered: Oct-05
I found an old school punch 30 in my closet. I went to hook it up to see if it still works. The power light is coming on, but there is no power coming out to the speakers. Is there anything i can do with it or just throw it away?
 

Silver Member
Username: Redbone15367

Mo U.S.A.

Post Number: 133
Registered: Sep-05
get it checked out. they where good amp's, might be worth it to fix?
 

New member
Username: Pike110

Post Number: 8
Registered: Oct-05
Are there internal fuses or anything that I could do to fix it? or would I have to take it to someone. I didn't know if there could be a quick fix for it.
 

Silver Member
Username: Redbone15367

Mo U.S.A.

Post Number: 136
Registered: Sep-05
take it to a shop, get an estimate.
 

Silver Member
Username: Dustin3

Tigard, Or U.S.

Post Number: 284
Registered: Oct-05
check ur cables to see if they are grounded correctly, or if they are warn out, before you take it to a shop.
 

Gold Member
Username: James1115

Wilton, Ct

Post Number: 4550
Registered: Dec-04
they have internal fuses that you can check, they are little and circle I believe. If tyhey are blown you have to get them from RF. I think I might have a few laying around actually if they are blown. What happens a lot with those amps is they used to get so hot that the soldering points would melt and not be connected very well. That is a great amp if you can salvage it I would. If not I will give you a few bucks for it rather then throw it out.
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us