Proper setup

 

Bronze Member
Username: Caraudiofanatic

Post Number: 22
Registered: Nov-05
would a hifonics tx1505 mono class d amplifier power two audiobahn alum12n subwoofers. they are dvc 6ohm 1000 watts rms 2000 watts max. i would have to run them at a 1.5 ohm load which both would be seeing about 750 watts per sub. would this work and hit just fine. plz reply asap.

matt
 

Silver Member
Username: Tjmutlow

Post Number: 969
Registered: Sep-05
that amp will never see that wattage, overrated and it probably is rated at 14.4 volts, so i would guess that that setup may see 900w to the subs.
 

Bronze Member
Username: Caraudiofanatic

Post Number: 23
Registered: Nov-05
per sub or both thanks.
 

Silver Member
Username: Tjmutlow

Post Number: 970
Registered: Sep-05
both
 

Bronze Member
Username: Caraudiofanatic

Post Number: 24
Registered: Nov-05
well then what about a digital audio 1000 watt mono. would that work it is fixed up to where each sub sees 1000 watts. thanks.
 

Silver Member
Username: Tjmutlow

Post Number: 972
Registered: Sep-05
do not know much about them, but unless it is rated at around 13volts, your never going to see max from any amp unless your charging system is made for it.
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us