How to wire 5 ch amp with 2 6x9 speakers and 2 subs?

 

Bronze Member
Username: Bradrgilman

GALvEStoN , Tx Usa

Post Number: 80
Registered: Nov-05
The specs are VX6005
MOSFET Five-Channel Power Amplifier
Max Power (2 Ohms) : 100W X 4 + 300W X 1
RMS Power (4 Ohms) : 50W X 4 + 200W X 1 at 0.04%
Bridged Power (4 Ohms) : 200W X 2 + 300W X 1
Signal-to-Noise Ratio : 102dB
Frequency Response : 20Hz-20kHz
Dimensions : 10-5/8"W x 2-7/16"H x 19-3/4"L

I have 2 subs wired to a 1 ohm with a mono amp and 2 great kappa 6x9's. Can I bridge the 4 ch speaker outputs to both speakers and then add the sub output to my subs because they can handle a little more power? I have 1 postive and 1 negative from the subs in the amp, so can I add the other amp to these subs too? Then bridge the other 4 channels to 2 channels for the speakers 6x9's.
thanks
 

Bronze Member
Username: Bradrgilman

GALvEStoN , Tx Usa

Post Number: 82
Registered: Nov-05
http://www.superstereowarehouse.com/index.php?main_page=product_info&products_id =641&zenid=bc344025f67ba33c4edbabb1b0b6aa6a
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us