Need some help

 

New member
Username: Boby

Post Number: 1
Registered: Dec-05
Alright this is going to be my first time installing an amp. Ive got an Mtx thunder 564. Which will do 70 watts RMS x 4 at 4 ohms OR 140 watts RMS x 4 at 2 ohms. I want to run it at 2 ohms so I can get more power out of it but I dont really understand how to do it. If I understood correctly then I just wire the speakers in parallel and they will run at 2ohms? Its a 4 channel amp and will be getting seperate preamp inputs for the front and rear speakers so will that change anything?
Thanks
 

Silver Member
Username: Tjmutlow

Post Number: 318
Registered: Sep-05
are you running subs or internal speakers
 

New member
Username: Boby

Post Number: 2
Registered: Dec-05
Internal speakers.
Rear deck: Pioneer TS-A6991R
Dash: Polk/MOMO MMC460
 

Silver Member
Username: Tjmutlow

Post Number: 333
Registered: Sep-05
your only going to get 4ohm, unless you maybe add 2 sets of tweeters, to drop the ohm load down to 2ohms
 

New member
Username: Boby

Post Number: 4
Registered: Dec-05
Ahh that sucks... Thanks though
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us