PPI art series

 

New member
Username: Vecc205

Post Number: 9
Registered: Apr-05
I have a PPI a600.2 and I was thinking of taking the 4 LM388N op amps out of it and replacing them with Burr Brown's either OPA2604's or OPA2134's. The pins are compatible and the -Vs and +Vs are very similar but I'm not sure if I will need to upgrade anything else, particularly in the power supply section. I want the chips to stay stable and I don't want the chips to oscillate. Is this idea a feasible one? Thanks for the help in advance.
 

New member
Username: Lilflippy

Post Number: 2
Registered: Nov-05
i have a audiobahn mono amp and it pushes 1200 watts rms to a 1 ohm load and it is connected to two 15inch 4ohm kicker L7's i was wondering how many watts is going to each voicecoil?
 

New member
Username: Vecc205

Post Number: 10
Registered: Apr-05
The part number is actually LM833N sorry about that.
 

Silver Member
Username: Solacedagony

New Jersey US

Post Number: 660
Registered: Oct-04
You might want to make a post to Glasswolf, Jonathan or Isaac for something that technical.
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us