|
New member Username: TblanchPost Number: 1 Registered: Nov-05 | I just ordered a 10" Alpine Type X series subwoofer and was wondering what type of amp would work best for that type of system? I would like to stick with Alpine just need to know mono or multi and what type of amp |
|
Bronze Member Username: HootzSaskatoon, Saskatchewan Canada Post Number: 37 Registered: Oct-05 | Alpine MRD-M1005. It's mono, digital, 1000W rms. There's other amps that are just as good and cheaper, but if you want alpine, go with that. |
|
Bronze Member Username: HootzSaskatoon, Saskatchewan Canada Post Number: 38 Registered: Oct-05 | Oh yeah, the MRD-M1005 is 1000W at 2ohm. So it'd be perfect as long as you've only got the 1 dual 4ohm sub. If you ever plan on getting a second sub, you might want to find something 1 ohm stable. |
|
Silver Member Username: Killerzracing71Fredericksbutg, Virginia United states Post Number: 161 Registered: Aug-05 | yeah but that 1000wrms is at 14.5 volts how often is your charging system there RMS Power at 12V, 20Hz-200Hz: Per channel into 2 ohms : 700W x 1 Per channel into 4 ohms : 500W x 1 RMS Power at 14.4V, 20Hz-200Hz: Per channel into 2 ohms : 1000W x 1 |
|
allende5 Unregistered guest | I will probably be selling my JL 1000/1 on eBay later tonight. Kick butt amp at 1000w RMS @ 1.5-4ohms. Very clean power, perfect for the Alpine Type-X. I'm probably going to set a buy-it-now at around $475. Check it out later if your interested. By eBay accout is the same (allende5). |
|
Bronze Member Username: BradrgilmanGAlVeStoN, Tx Usa Post Number: 19 Registered: Nov-05 | I can get a Planet Audio VX-2200D Amp for only $300 shipped! Its better then the boss 4000watt and 1200/1 kicker. (I have had all of them) It has 0 gauge terminals and is huge 10-5/8"W x 2-7/16"H x 18-3/4"L". Email me @ Bradrgilman@yahoo.com To see this Amp go to this link http://www.superstereowarehouse.com/index.php?main_page=product_info&products_id =643&zenid=bc344025f67ba33c4edbabb1b0b6aa6a |
|
Bronze Member Username: HootzSaskatoon, Saskatchewan Canada Post Number: 41 Registered: Oct-05 | "yeah but that 1000wrms is at 14.5 volts how often is your charging system there RMS Power at 12V, 20Hz-200Hz: Per channel into 2 ohms : 700W x 1 Per channel into 4 ohms : 500W x 1 RMS Power at 14.4V, 20Hz-200Hz: Per channel into 2 ohms : 1000W x 1" So look for an amp that is 1000wrms at 12V? Why? So you can say "My sub is receiving 1000watts rms when my car is turned off". who cares??? The lowest I've ever seen my voltage drop to was like 13.9. Unless you're pounding the thing at max volume, will you really notice? |