|
New member Username: Cusslerfan123Colorado Springs, Colorado United States Post Number: 3 Registered: Nov-05 | Hey I have MTX 375 watt amp,MTX 12in. Sub, 240 watt SoundStorm SMP3-100R. I had the system working for a while and it sounded real good. It is a project car so i was adding extra speakers by spliting the wires on the back speakers, for some reason when i pushed the wires back through the seal it was cut and it was grounding out. I fixed that, but now the amp will not come back on. The ground is connected, the power is 12volts like its supposed to. the RCAs are plugged in and the REM wire is connected, no fuses are blown and it just won't turn back on. What do you think is wrong? Thanks. My e-mail is SamBrown99@aol.com if you want e-mail. |
|
Silver Member Username: TjmutlowPost Number: 201 Registered: Sep-05 | Use a test light and make sure power at the amp, both red wire and remote with radio on use this to start. |