Amp/speaker problem

 

New member
Username: Boshans

Post Number: 1
Registered: Jul-05
i got my amp installed recently and after i did my two back speakers are only playing lows, no highs or mids, just bass. before the amp was installed it played everything just fine, no idea whats wrong with it. any help?
 

Silver Member
Username: Illuminator

Post Number: 807
Registered: Apr-05
Is the lowpass filter turned on?
 

Silver Member
Username: Dominirica012

Charlotte, North Carolina US

Post Number: 177
Registered: May-05
check the frequency too although im 90% sure just liek jexxen stated that the LPF is on
 

Bronze Member
Username: Winn

Santa Ana, California US

Post Number: 35
Registered: Jun-05
If your existing system already have crossover, just turn off the built-in crossover on the new amp. If there is no option to turn it off, just set it at Full range signal, or turn off LPF (Low Pass Filter)
 

New member
Username: Boshans

Post Number: 2
Registered: Jul-05
i got it fixed. just had to change some setting on my radio and it started working fine. set the radio to full range and it worked.
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us