Ok im running a boss pd3000 amp 3000 watts and 2 audiobahn alum 12q 2000 watt subs each im trying to up my watts help me out
ok this is what i got
Subwoofers Audiobahn 2000 wat Alum12q EPDM DUAL 6 OHM 1000 watts rms Power handling 1000 watts rms Frequency Response 18hz-500hz Efficiency 96.4 dB 3" 4-layer ASV voice coil Dual 6 Ohm 3 Ohm or 12 OHM operation
Amp Boss pd3000 3000 watt amp Max power 3000 Watts RMS power, 4 ohms 350w x 2 RMS power 2 ohms 700w x 2 RMS power 1 ohm 1000w x 1 RMS power 1/2 ohm 1500w x 1
Frequency response (+/- 3dB) 9Hz to50kHz Signal-to-noise ratio>105dB Channel separation>90dB Low pass Crossover 50Hz-100Hz High pass Crossover 120Hz-720Hz Bass boost 0-+18dB Bass boost Frequency 50Hz-100Hz Dimensions, LxWxH 20 1/8" x 13 3/8" x 2 3/4"
yup for the peak output, use one pd3000, and wire both sub coils in parallel (3 ohms) then wire both subs together in parallel (1.5 ohm load) and bridge the pd3000 amp (.75 ohm load at the amp) and you'll get all teh power possible from that setup. thanks for posting enough info for us to work with this time. the second amp won't be needed. you'd have been better off using a pair of dual 2 ohm coil subs instead of those dual 6 ohm jobs. the ones you have are designed for running in threes, not pairs.