foxstoner0420 Unregistered guest | Im looking for an amp that does 400 watts RMS x 2 at 4 ohms. Im not looking to spend over $250 if possible. Thanks |
VermontSPL Unregistered guest | http://www.etronics.com/product.asp?stk_code=powlt19202&store=&catid=307 Try this one out its only 370x2 but close and only like $160 good companly too I only use them and Rockford. |
VermontSPL Unregistered guest | http://www.etronics.com/product.asp?stk_code=powlt19202&store=&catid=307 Try this one out its only 370x2 but close and only like $160 good company too I only use them and Rockford. |
Silver Member Username: Zacdavis~Post Number: 414 Registered: Sep-04 | yes, i like those as well, however the SPL line is a little cheaper and its the same products with different names. try the 1600watt spl http://search.ebay.com/1600-spl-amp |
Gold Member Username: GlasswolfNorthWest, Michigan USA Post Number: 7006 Registered: Dec-03 | what is this amp for? subs? full range? if its for subs, why not use an amp rated for 800wRMS x 1 @ 2 ohms instead? you could get a better amp for cheaper going that route. much better than power acoustik I'm sure. they don't get a lot worse to be honest. |
Silver Member Username: Zacdavis~Post Number: 415 Registered: Sep-04 | i know glass, i would've said the same thing last year. many people run them at 2ohm bridged all day long. they will take a beating and keep on ticking. i'd guess it puts out over 1000 rms at 2ohms mono. really, they dont sound to bad either, you'd be very surprised as was i. you should buy one for the heck of it someday and check it out, you can get one for around 120 bucks. that amp in particular has impressed me more than...well let start that differently, that amp has exceeded my expectations far more than any other amp has. |
foxstoner0420 Unregistered guest | My subs are 400w rms. They are 4 ohm dvc. Would it be ok to run them at 2 ohm? also how would i wire them to get 4 0r 2 ohms. Thanks |
New member Username: Wcsfinest22Post Number: 1 Registered: Dec-04 | can the rockford fosgate rfd2115 subs be wired to 1 ohm |