Distortion

 

kyle h.
Unregistered guest
hi i got a phoenix gold qx2350 and i fixed the pr0tection mode , it was the ground, now when i drive the amp hard it will distort any suggestions?
 

Silver Member
Username: Carguy

Post Number: 582
Registered: Nov-04
Hey Kyle, can you explain further by your definition of distortion? Different people use it to describe many situations.
Does it make the bass shake or is it picking up noise? Did you also set the gain control properly? If not it will distort at high volume.
 

kyle h.
Unregistered guest
well actually i had it going not bridged then i bridged it then it just stopped working, there is a bass control, sens control, sub crossover control, but its not even working anymore...the distortion sounded like it was picking up noise.
 

kyle h.
Unregistered guest
anyone?
 

Silver Member
Username: Carguy

Post Number: 630
Registered: Nov-04
Hey kyle, if you're picking up noise then it's most likely your ground. It has to be done properly, if not it will pick up engine/power noise. Also if you use cheap rca cables for the amp, they will also pick up noise. Try to use shielded directional rca cables. Keep them as far away as possible from your power wires.
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us