How run 2 12"pyle subs with a qv4-800 amp?

 

New member
Username: Bbergeson21

Post Number: 1
Registered: Nov-04
i have two 12" pyle 1000w subs in a sealed box with 800w 4 channel power acoustik amp, need help finding the right settins and if i should run the subs down to 2ohm, the amp is 2ohm stable
 

Silver Member
Username: Carguy

Post Number: 368
Registered: Nov-04
Hey Brian, I hope that amp will actually produce. I hear they mostly die out at high volumes.
Anyhow, you can operate the amp in bridged mode. This should give you 2 channels for each sub. If your subs are DVC 4ohms, you can turn wire each sub in parallel for 2ohms. This should give you 2ohms for each channel.
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us