Help, I have my subs but I dont know about the amp...?

 

New member
Username: Blinky_boy

Post Number: 1
Registered: Nov-04
I am kind of new to car stereo systems so if some one could help me that would be great. I recently bought a pair of Rockford Fosgate subs in an encloser. Each of them are 500 watts RMS, with a 1000 watt peak. The subs are 8 ohm, and they can be bridged to be 4 ohms, I dont know what that means. To see them, here is the link: www.cardomain.com/sku/ROCPL3212 If some one could help guide me to an adequate amp under 400 dollars I would be very greatful, Thanks a lot,
DJ
 

Silver Member
Username: Lbeckner

Tulsa, Ok Usa

Post Number: 101
Registered: Oct-04
Ouch. You shoulda got 4 ohm subs. There are a lot of good amps out there. Get one that is 2 ohm stable and not 1 ohm. That way you will reach closer to the potential of the amp.
 

taylor17
Unregistered guest
If you want to go with the same brand go with the p8002 or the p10002
 

taylor17
Unregistered guest
Go with the p8002 it is 800 wattsx1 at 4 ohms so if you bridge it it will be 400 watts at 4 ohms. You can correct me if I am rong but I think that is right. I have the p8002 going to 2 rockford 10 hx2's got the amp at www.sonicelectronix.com for $380
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us