Blaupunkt TV model W23/173I-GB-FHBKUP-DE no sound

 

New member
Username: Lineofstars

Post Number: 1
Registered: Nov-14
Hi everyone.Im new here and obviously need your hand of help.
Suddenly the TV start making a strange sound to the speakers,than there the sound has gone.The speakers I have checked them connecting to other device.The audio jack output also does not work because I have tested with an earphone.
The exact tv model and info are:
Blaupunkt TV,model # W23/173I-GB-FHBKUP-DE
Ref B23C173TCFHD
Product code BW23R173BFBKPE404
Serial Number BW23R173BFBKPE404-107426 00808
Motherboard serial t.msd309.28b

Photo link to see the motherboard:
https://plus.google.com/photos/102793503591974069148/albums/6079107146329663217/ 6079107625735817218?pid=6079107625735817218&oid=102793503591974069148

Wich is your step by step procedure to repair it?
What components make the audio circuit exactly?
Thanks in advance.
 

New member
Username: Lineofstars

Post Number: 2
Registered: Nov-14
Hi again to all of you.
First ,with your help,I want to see IF the audio IC YD 1517p is good.
So,I will attach the datasheet of the IC .
Turning the TV on, I have checked the voltage using the multimeter,the values are:
Vcc=12 to pin#7
1/2Vcc=0 to pin#3
Rest of the pins voltage=0.

Turning the TV off, In diode mode by multimeter with the black probe to GRD and red probe to the pin
#1 value is 796
#2 it beeps
#3 value is 796
#4 it beeps (why?)
#5 it beeps
#6 value is 792
#7 value is 1755
#8 starts from 1800 and goes to OverLimit
#9 value is 797
#10 to #18(the last pin that the IC has) it beeps cause is the GRD.

Turning the TV off, I have checked the resistance Ω(ohm mode) by multimeter with the black probe to GRD and red probe to the pin
#1 value is OL(over limit)
#2 value is 0
#3 value is OL
#4 value is 10 Ω ohms
#5 value 0
#6 value is OL
#7 value is OL
#8 value is OL
#9 value is OL
#10 to #18 value is 0
Based on this measurements please give me a hint about what is your idea if the IC is good,or guide me to do other measurements,or technics using the multimeter,beacause I only have this kind of measurement tool.
Are the above values correct?
application/pdfUpload
IC yd1517p.pdf (85.3 k)




application/pdfUpload
IC yd1517p.pdf (85.3 k)
« Previous Thread Next Thread »

Add Your Message Here

Bold text Italics Create a hyperlink Insert a clipart image Add a YouTube Video
Need to Register?
Forgot Password?
Enable HTML code in message
   



Main Forums

Today's Posts

Forum Help

Follow Us