MIT CS3515R - VERTICAL LINES

 

New member
Username: Mike67stang

Post Number: 1
Registered: Nov-10
20 YR. OLD DIRECT VIEW UNIT. 8 MONTHS AGO WHEN FIRST TURNED ON VERTICAL LINES APPEARED ON TOP 1" OF SCREEN, LEFT AFTER 10-15 MIN OF "WARM UP". NOW LINES ARE ON 1/2 THE SCREEN AND TAKES ABOUT 40 MIN OF WARM UP. IS IT TIME TO GET A NEW SET ? WHAT DOES THIS INDICATE ? I'VE NOTICED THE OLDER SETS ARE JUST ABOUT IMPOSSIBLE TO FIND PARTS.. ANY ADVICE APPRECIATED.. MIKE
 

New member
Username: Mike67stang

Post Number: 2
Registered: Nov-10
CORRECTION !. LINES ARE HORIZONTAL, NOT VERTICAL,., THEY GO ACROSS WHOLE SCREEN LEFT TO RIGHT,.,HORIZONTAL.. AND IT'S 35" DIRECT VIEW.. THANKS
 

Platinum Member
Username: Plymouth

Canada

Post Number: 15585
Registered: Jan-08
Welcome to eCoustics MIKE!


It seem to be a capacitors leak problem in the power supply!

Check or replace the capacitors!
« Previous Thread Next Thread »

Add Your Message Here

Bold text Italics Create a hyperlink Insert a clipart image Add a YouTube Video
Need to Register?
Forgot Password?
Enable HTML code in message
   



Main Forums

Today's Posts

Forum Help

Follow Us