Home > Consumer Reviews > Canon WP-DC90 Waterproof Case for PowerShot A620 and A610
Canon WP-DC90 Waterproof Case for PowerShot A620 and A610
See it at Amazon.com for $185.00Average Customer Rating
Amazon Customer Reviews
Most Helpful First | Newest First | + Share43 of 43 people found the following review helpful:
WP-DC90 Housing Excellent Choice if your budget is limited
The Canon WP-DC90 Underwater Housing is engineered specifically for the Canon A-610 and A-620 compact digital cameras. It gives access to all camera controls and is rated to 130', the maximum depth for recreational scuba diving. I have used this housing on one dive trip to Cozumel, shooting 950 stills and about 70 minutes of video during 17 dives. The housing was easy to use and maintain, and fit the A-620 camera perfectly. The image quality of the video was outstanding, and would have been even better if I had had an u/w video light. I did have a u/w strobe for shooting stills, and these photos were also outstanding. The A-620 camera and WP-DC90 housing did a fantastic job for me considering my limited budget.
CONSTRUCTION: The WP-DC90 housing is made of clear molded polycarbonate with an optical glass port in front of the camera's lens. All camera controls are accessible from the housing's buttons and levers, including the main control dial, zoom control, 4-way controller, and record/play switch. The camera's built in-flash loses some effectiveness as it is partially blocked by the lens port, so the addition of an external strobe or video light is recommended. Buy a "slave" strobe, the type senses the camera's built in flash, as this housing and camera do not support TTL flash metering. The camera is loaded into the housing through a large hatch in the back that is sealed by a single rectangular rubber o-ring. This is the only user-seviceable component of the housing, and it (plus the groove in the housing) MUST be carefully cleaned, dried, and re-lubed with silicone grease every time the camera is loaded into it before a dive. Spare o-rings can be purchased from Canon's Parts Department for about $20.
Besides the large rear hatch for loading the camera, the housing has 14 other penetrations for control levers and push buttons, corresponding to the camera's controls. These are all sealed with o-rings that are NOT user serviceable. For this reason, the WP-DC90 housing should be considered to have a limited lifespan for scuba diving. I met a family in Cozumel that had a pair of Canon A-85's in four year old WP-DC30 housings; one of these sprung a leak during through the shutter-button o-ring during a dive; these housings had made about 100 dives total. I don't know if the WP-DC series housings can be returned to Canon for reconditioning (replacement of all non-user-serviceable o-rings), but I suspect that this would not be economically practicable since a new housing costs only $169 retail.
The failure mode for small o-rings like those on the WP-DC series housing involves the gradual build up of salt crystals around the control shafts that erodes the o-rings until they can no longer seal tightly. With this in mind, the WP-DC90 housing and A-620 camera do provide a means of capturing underwater video at 640 x 480 x 30 fps quality, and 7 megapixel stills, in a package that costs only $400 (plus the cost of an SD card if you don't already own one). This is a fraction of the cost of almost any other type of underwater video system, and I highly recommend it if you want a record of your dive vacation at a reasonable price.
CONSTRUCTION: The WP-DC90 housing is made of clear molded polycarbonate with an optical glass port in front of the camera's lens. All camera controls are accessible from the housing's buttons and levers, including the main control dial, zoom control, 4-way controller, and record/play switch. The camera's built in-flash loses some effectiveness as it is partially blocked by the lens port, so the addition of an external strobe or video light is recommended. Buy a "slave" strobe, the type senses the camera's built in flash, as this housing and camera do not support TTL flash metering. The camera is loaded into the housing through a large hatch in the back that is sealed by a single rectangular rubber o-ring. This is the only user-seviceable component of the housing, and it (plus the groove in the housing) MUST be carefully cleaned, dried, and re-lubed with silicone grease every time the camera is loaded into it before a dive. Spare o-rings can be purchased from Canon's Parts Department for about $20.
Besides the large rear hatch for loading the camera, the housing has 14 other penetrations for control levers and push buttons, corresponding to the camera's controls. These are all sealed with o-rings that are NOT user serviceable. For this reason, the WP-DC90 housing should be considered to have a limited lifespan for scuba diving. I met a family in Cozumel that had a pair of Canon A-85's in four year old WP-DC30 housings; one of these sprung a leak during through the shutter-button o-ring during a dive; these housings had made about 100 dives total. I don't know if the WP-DC series housings can be returned to Canon for reconditioning (replacement of all non-user-serviceable o-rings), but I suspect that this would not be economically practicable since a new housing costs only $169 retail.
The failure mode for small o-rings like those on the WP-DC series housing involves the gradual build up of salt crystals around the control shafts that erodes the o-rings until they can no longer seal tightly. With this in mind, the WP-DC90 housing and A-620 camera do provide a means of capturing underwater video at 640 x 480 x 30 fps quality, and 7 megapixel stills, in a package that costs only $400 (plus the cost of an SD card if you don't already own one). This is a fraction of the cost of almost any other type of underwater video system, and I highly recommend it if you want a record of your dive vacation at a reasonable price.
12 of 12 people found the following review helpful:
Very dependable!
I've had three Canon Waterproof cases over the past four years. Each for a different model of a canon camera I've owned. The first year the case held out well, until one day I was in a rush and didn't pay attention to the rubber seal, which was twisted and didn't seal properly. Needless to say I fried my camera. However, that was completely my fault. Having learned my lesson I've never had another incident. I've taken these camera cases everywhere: swimming, kayaking, and diving. I've been over 100 feet down with my canon camera and waterproof case and everything held up perfect! I definitely recommend these cases. They are very durable and can withstand some abuse. Just be careful you don't get the seal twisted. =)
7 of 7 people found the following review helpful:
Allows total access to camera's functions.
So far this housing has been on 14 dives (Little Cayman...awesome!). The case performed flawlessly and allows you to access virtually ALL the camera's functions underwater. The flash diffuser works very well...however, I've only used the camera in 130'+ vis. A couple of things should be mentioned:
1) This housing uses the camera's flash. ANY housing using the camera's flash will have backscatter problems depending on the visability. I belive third party extension flashes are available.
2) For coldwater divers or anybody using thick gloves, you may not be able to access some of the camera functions because the buttons are close together. On/off, zoom and operating mode should be no problem though.
Overall an outstanding value considering the alternatives, i.e. housings by other manufatureers that cost 5x as much. Very happy with my purchase.
1) This housing uses the camera's flash. ANY housing using the camera's flash will have backscatter problems depending on the visability. I belive third party extension flashes are available.
2) For coldwater divers or anybody using thick gloves, you may not be able to access some of the camera functions because the buttons are close together. On/off, zoom and operating mode should be no problem though.
Overall an outstanding value considering the alternatives, i.e. housings by other manufatureers that cost 5x as much. Very happy with my purchase.
3 of 3 people found the following review helpful:
Works Great, Exactly How it Should
I bought this case because there is no case avaliable for my old digital camera so I broke down and bought a whole new camera and made sure there was a case avaliable. I took this case and the Powershot A620 diving in cozumel mexico and grand cayman. In cozumel we dove to a max depth of 100 ft and the camera and case were perfect. You have access to all functions on the camera whic is amazing. I really liked to be able to switch to video while diving. I Highly reccomend this product to any divers who want to be able to take their digital underwater.
2 of 2 people found the following review helpful:
Great case!
Tested the case at home in a water bucket per instructions. No leaks. Went on a dive trip and the first dive I put in some toilet paper and closed it up. Went to 75 feet. No leaks. Second dive, removed tissue and put in the camera (A610). Performed flawlessly for 17 dives. Excellent case. Highly recommend the case and also the toilet paper test.