Home > Consumer Reviews > Premier Mounts PCM-MS2 Universal Tilting Flat Panel Mount For 37-Inch¿61-Inch LCD/Plasma Displays

This mount has two main advantages over some: 1) the ability to have some side to side offset in case your framing does not line up exactly with the center lines of the mount; 2) multiple mounting points some distance apart making the attachment very solid. The fact that the are two mounting pieces causes no real extra work, there is a template included that makes aligning the two pieces almost trivial. In my case I figured out where I needed the bottom plate, mounted it, set the template on top, set the top plate on top of the template, marked the holes, mounted the top piece and everything lined up perfectly.

Two slight problems stop this from getting a perfect score: 1) the bolt mounting slots in the plates are a little restrictive, I could have used about an inch more play to get everything perfectly lined up (my studs are way off the relative center point). 2) it's a little hard to get the locking screws into the mount once you have your TV mounted to the wall, screws with allen heads and a long allen key (as on some other designs) would make this easier.

Very good design and construction. I am using this to hold a Pioneer PDP-5080 plasma. The wide spacing between the 2 mounting bars make this mount very stable. I would not trust some of the other mounts out there that have only 7" between mounting bolts. When tilted, this mount will be a couple inches further from the wall than some of the center pivot mounts. However, you can be sure that your TV is secure and safe. Comes with every imaginable bolt size. Instructions are great.

IT worked and all the piece were there.
Cant ask for too much more on these things- I wish this installed itself.

My install expert was able to get this on the wall to mount my new 52 inch Sony LCD. Works great, except the instructions that tell you which of the 15,000 pieces of hardware to use needs to be updated with new TV models - the instructions are several years old. Installing this bracket is not for the faint of heart, but if you are experienced and savvy, it's a very hefty product that does the job, and I feel the price was decent.

Premier Mounts PCM-MS2 Universal Tilting Flat Panel Mount For 37-Inch¿61-Inch LCD/Plasma DisplaysThe mount came complete with all necessary mounting hardware. I am not mechanically inclined, but my sons figured out how to mount it without reading the attached directions. My flat panel was 52 diagonal, and we used the tilt angle to it fullest. The mount is solid and comes with all types of screws for various types of flat panels. This was priced at conn's for 199.99 got at amazon for 129.99 exactly the same!