Home > Consumer Reviews > Vantage Point CGUPM06-S Universal Front Projector Mount - Silver
Vantage Point CGUPM06-S Universal Front Projector Mount - Silver
See it at Amazon.com for $52.16Average Customer Rating
(4.5 out of 5)
Amazon Customer Reviews
Most Helpful First | Newest First | + Share4 of 4 people found the following review helpful:
Perfect for my Sony VPLAW15
(5 out of 5) by Clay Cope on Jan 18, 2008 (Seattle, WA)I used this ceiling mount for my Sony VPLAW15. The hardware is strong and simple, let me say again, simple to put together. You can't beat the price either.
It literally took around 30 minutes for installatin, including drilling the holes, finding the beam, etc. The instructions are pictures only, no dialogue, but plenty sufficient. It comes with all the parts needed to mount your project. I would highly recommend this mount.
It literally took around 30 minutes for installatin, including drilling the holes, finding the beam, etc. The instructions are pictures only, no dialogue, but plenty sufficient. It comes with all the parts needed to mount your project. I would highly recommend this mount.
2 of 2 people found the following review helpful:
This product is great!
(5 out of 5) by L. R. Kreykes on Jan 28, 2008I was pleased with this product from the time I pulled it out of the box to full instalation and use. It is well manufactured and is very sturdy. I would recomend it to anyone.
1 of 1 people found the following review helpful:
Great Product
(4 out of 5) by Alok Sahai on Mar 8, 2009 (Dallas,TX)Great Product, Easy to install, cost effective and great manual.
I have installed Sanyo PLV-Z60 projector in my Media room it works greats. To fix projector to the mount you might have to buy three screws, as provided screws are small. Secondly make sure the Stud is in center of room as top 3 screw fit in one line.
I have installed Sanyo PLV-Z60 projector in my Media room it works greats. To fix projector to the mount you might have to buy three screws, as provided screws are small. Secondly make sure the Stud is in center of room as top 3 screw fit in one line.
1 of 1 people found the following review helpful:
the NOT THE RIGHT SCREWS FOR MY PROJECTOR mount
(3 out of 5) by Brian Sykes on Feb 22, 2009 (Carthage, NC)The mount looks excellent. The projector I purchased was listed on the site as one that worked with this particular mount. When we got it out to mount it - I was excited - thinking this would be easy - UNTIL I tried putting it together for the first time and realizing the screws that came with it were all TOO big. I ended up at Bet Bu (which did not have any mounts in stock) and bought a TV trey mount and the screws that came with it worked. Not the cheapest or easiest solution - but it now works. Before you order, even if your projector is listed - make sure it will work...
1 of 1 people found the following review helpful:
Optoma HD70 Perfect Match
(4 out of 5) by Craig Fox on Jan 9, 2009 (Charlotte, NC)I mounted my Optoma HD70 on the ceiling and it couldn't have gone better. I was actually able to use the mount without the middle extension bar as I mounted my HD70 directly on a sloping ceiling and exactly in the middle, left to right, of the screen. My HD70 has a very low profile to the ceiling. The sloping ceiling allowed some additional access to the adjustment screws.
The only improvement that I can see being made would be to put rubber feet on the three extension legs that tighten into the projector to allow for some vibration dampening and for the screws that slide through the extension legs to fit more snug inside the legs.
The only improvement that I can see being made would be to put rubber feet on the three extension legs that tighten into the projector to allow for some vibration dampening and for the screws that slide through the extension legs to fit more snug inside the legs.