Home > Consumer Reviews > D-Link DWL-120 11 Mbps Wireless USB Network Adapter

Being that this is a wireless and USB device it is extra easy to install. Just one cable to the USB port. Especially when your USB port is on the front of your computer, like mine.

It recognized the Access Point right away and didn't even have to configure much. I just followed the quick install guide and everything was fine.

I also thought since it is a USB device it wouldn't transfer data as quickly. I was wrong. Everything was just as fast as the rest of my wireless network. THANK YOU D-Link!

A good friend of mine had this USB adapter and a couple of other USB devices like a webcam, a zip drive, and his wireless keyboard and mouse. He was getting poor transfer rates (2-3Mbps) with this USB adapter so he decided to sell it to me and get one of the PCI type Wireless adapters. This was the perfect choice for both of us. He now gets about twice as much speed as he did with this USB adapter and I get about 5-6Mbps with this USB adapter. It seems as though he hade too many USB devices and the bandwidth allotted for this device wasn't what he wanted.

We also found out, after actually reading the manual thoroughly, that placing wireless devices near monitors, TVs, radios, and anything else that uses radio waves could suck up the signal strength of the wireless products. (His USB adapter was on top of his monitor, since that was the highest point he figured it was best.) Turns out it wasn't.

So I ended up getting a good deal, and a great product. And he ended up finding a good alternative. I would like to send my thanks to my friend Matt for the good price and D-Link for the useful documentation.

I bought this USB Wireless Network Adapter because I didn't want to take up a PC slot in my laptop and I could always use this with a Desktop whenever I needed to.

The Setup was super easy, (install drivers from CD, plug it in, click "next" a bunch of times and it worked with default settings) It took me under 10 minutes to get this device working. Most of it was remembering what my network settings are.

Recommended to anyone who likes to do things the Easy Way.

I own the Wireless Network Kit D-Link sells and it comes with two of these Wireless USB Network Adapters. I was able to set-up my network in about an hour and only ran into one problem. But it turned out to be my fault and thank to the documentation I was able to solve it rather quickly. Next time I will read the instructions a little better.

The netowork runs fast and I am more than happy with the results. I highly recommend this product along with the Kit for people who are like me and don't want to run wires thoughout their home.

I purchased the DWL-120 along with a DI-713P wireless router. The setup for the DWL-120 was per the manual until I rebooted the computer at which time Windows 98 failed boot up with protection error message. Computer would not complete a boot up until DWL-120 was disconnected. After computer booted I could plug in DWL-120 and it would work fine until next reboot. Computer is an AMD 450 with MVP3 chip set running Windows 98. After much troubleshooting I was able to narrow problem to shared interrupt. I turned off video card interrupt in BIOS and computer booted nominally with DWL-120 connected.

I'm not sure if this is a problem with my hardware or the DWL-120 driver but everything works great now. Very satisfied.